How To Knit A Pot Holder

Want an easy fast knitting projection?!  These knitted potholders are an ideal project that makes such beautiful and useful potholders for your home

I dearest searching through Etsy and Pinterest for ideas for my habitation, and I love doing DIY projects for my dwelling house.

There is a large sense of satisfaction in having made something yourself and taken that fourth dimension to learn and make something special.

I found cute pictures of knitted potholders all over Etsy and Pinterest.  So I figured I would try to make some myself.

These potholders are honestly just then easy and fast. I made two potholders in just a few hours ane evening while watching Telly!

These have a handy hanging leather strap on them, because one of the things I recently added to my kitchen cabinets was an IKEA Fintorp hanging shelf!  It hangs all my pot holders and oven gloves actually handily close to my stove.

But you could also brand these potholders without the strap also. The strap isn't essential, simply if you will be hanging these potholders it is a handy and pretty way to do that.

I was a bit concerned at start about a knitted potholder'south ability to handle hot dishes and pans.

But honestly it is non an effect with these potholders. I chose a cotton string, that is normally used for things such as macrame.

It is dainty and thick, and it knits up into a really squeamish solid hard-wearing potholder.

By making a pair of these potholders, means they tin both exist used together to handle all your hot pots and pans! At that place is i for each mitt!

This post contains affiliate links. This ways that if you click on a link and make a purchase via that link I may receive a small commission, at absolutely no additional cost to you. You can view my disclosures hither.

Supplies Needed to Make the Potholders

US size 13 (9mm) Knitting Needles

5mm Cotton Cord (in color of your choice)

Small piece of leather

Scissors or a rotary cutter

Ruler or record measure

Leather Punch

Rivet Kit

Hammer

Related: DIY Rattan Cane Pen Holder

How to brand the Knitted Potholders

There really isn't much to this knitting pattern at all!

Just cast on fourteen stitches with the cotton cord.

Now knit 24 rows of garter stitch.

Keep knitting until all 24 rows are completed. Cast off, and weave or sew in whatsoever ends.

The hardest function of all this (and it really isn't difficult at all!) is placing the leather strap on the end of the potholder. Equally I previously mentioned, you don't need a strap unless yous want to hang these up.

If you lot will make a strap, just cut a piece of leather for each potholder that is around 7 inches long, and about 0.5 inches broad. You can cut these with scissors or a rotary cutter.

And so using a leather punch, dial a hole at each stop of the strip of leather.

You volition next concur both ends of the leather strap together, and then that both holes at each terminate will overlap.

Now insert a rivet pivot from behind (the head of the rivet pin will be on the other side, and the smaller end of the rivet pin will be facing y'all, as in the photo below).

You now need to push button that rivet pivot through one corner of the potholder.  This is the part that I institute the hardest to be honest.

My tip for this role is that yous should find a tight stitch to push it through. With the weave of the knitted potholder, in that location will be some tighter stitches and some looser ones.

Observe the tightest one towards the corner, and then insert the rivet and leather strap.

Once the rivet is pushed through, put the cap on the rivet pin.

The rivet kit comes with a setter and an anvil.  Use a hammer to lightly hammer onto the rivet cap.

I establish that doing this too hard actually bent the rivet besides much. Just tap it into place. In that location is really no demand to do a actually strong hammering here.

Intendance of the Potholders

These potholders should exist able to go in the wash easily. They are made of cotton cord, and then wash them on a warm wash in your washing machine.

The but effect with washing these is the leather strap.  At present you tin can either remove the strap and redo it after they are washed, which is the most dramatic matter you can practice, and really non the best approach.

Or you tin can perhaps somehow tie upwardly the leather strap in a lingerie washing bag so that it is protected.

If y'all are concerned well-nigh washing these with the leather strap on them nevertheless, hand washing them, or spot washing them, might exist the best way to make clean them. They are very hard wearing and durable, and they should last yous quite a while!

Related: DIY Fabric Linen Cocktail Napkins

Related: 19 Ambrosial Leftover Yarn Knitting Patterns

Want an easy fast knitting project?!  These knitted potholders are an ideal projection that makes such beautiful and useful potholders for your dwelling house

Source: https://makecalmlovely.com/diy-knitted-potholders/

Share this post